Thursday, 21 December 2017

Cisco Expands Learning Portfolio with New Certifications

Cisco, a worldwide systems administration pioneer, has declared that it is growing its learning portfolio with new business design preparing and affirmations.

These confirmations are intended to quicken the pace of business change, advancement and development, it said.

Giving experts the most recent aptitudes, devices and best practices empowers them to fabricate and fortify the extension between innovation arrangements and business needs, said an announcement from the organization.

These new offerings stamp the second late expansion to Cisco's business change centered learning portfolio, it said.

Shadi Salama, channel pioneer – East Region, Cisco Middle East, stated: "The connection amongst client and merchant is as a rule altogether disturbed by computerized change, with the long haul result being a nearer relationship, traversing more than the arrangement."

"As the business changes and organizations endeavor to develop their organizations, new ability holes are framing," Salama said.

"Our new business design preparing and affirmation offerings focus on the business abilities that go as an inseparable unit in conjunction with the innovation aptitudes to address the developing ability needs delivered by business change," Salama included.

As indicated by a current examiner report, just around 15 for each penny of associations feel they have the correct ability set up for computerized change. Cisco is tending to this aptitude hole by extending its preparation, confirmation and enablement programs.

Three new authority accreditations and related instructional classes have been intended to dynamically manufacture and approve skill in business design:

Cisco Business Architecture Analyst Certification: Equips experts with a general attention to business design standards and gives a philosophy to revealing an organization's business objectives. These coveted results could then be crossed over to the innovation arrangements required to accomplish them, therefore constructing validity and affinity with clients or key inside partners.

Cisco Business Architecture Specialist Certification: Builds on the foundational aptitudes and information evaluated at the expert level with an emphasis on change administration and the making of an altered change guide.

Cisco Business Architecture Practitioner Certification: Expands upon the pro level by approving an applicant's authority in utilizing apparatuses, strategies and best practices to connect IT arrangements with the association's business objectives. Members will be surveyed for their capacity to make and guide the client engagement excursion to convey unmistakable business results and esteem.

Instructional classes supporting each of these affirmations, individually, include: receiving the Cisco Business Architecture approach; applying Cisco Business Architecture Techniques; acing the Cisco Business Architecture teach.

These new offerings widen Cisco's Business Transformation portfolio activities, propelled in April 2017, with the presentation of the Customer Success Manager accreditation. Cisco keeps on building up a pipeline of extra preparing and affirmations that will additionally propel aptitudes around there, it said.

Tejas Vashi, senior chief, item technique and showcasing, Cisco Services: "We enable clients to change their organizations, we're utilizing our ability and authority to address both innovation and ability worries over the business."

Tuesday, 15 August 2017

Cisco 400-201 Braindumps

Question: 15

In an Internet scenario with noncongruent unicast and multicast topologies, which protocol a scalable policy for performing multicast RPF checks?

A. MADCAP
B. MSDP
C. MBGP
D. PGM

Answer: C

Question: 16

An engineer is configuring an Embedded Packet Capture. Which two limitations must the engineer be aware of? (Choose two)

A. EPC captures only multicast packets on ingress and does not capture the replicated packets on egress
B. Existing EPC features can be supported on Cisco IOS and not on Cisco IOS-XR devices
C. On Cisco IOS and Cisco IOS XE, the packet buffer is stored in DRAM and persists through reloads
D. On Cisco IOS and Cisco IOS XE, the capture configuration is not stored in NVRAM and does not
persist through reloads
E. To limit the capture to desired traffic in EPC, control plane policing, access lists, and NBAR can be used

Answer: A,D

Question: 17

Which BGP feature improves the convergence and response time to adjacency changes with BGP neighbors?

A. reducing BGP scanner timing to the minimum that is supported
B. BGP Multihop
C. Next-Hop Address Tracking
D. Fast Peering Session Deactivation
E. TTL Security Check

Answer: E

Question: 18

A service provider has a requirement to prevent and prevent spoofing attacks by verifying the reachability of the sources address in a packet that is forwarded into its network. Which method must be the service provider use?

A. CoPP
B. iACL
C. uRPF
D. RTBH

Answer: C


Cisco 400-201 Exam Questions and Dumps Free Download

Wednesday, 19 July 2017

400-201 Sample Question

Question: 11

Which are the three characteristics of Cisco IOS Embedded Packet Capture? (Choose three)

A. It has the facility to the export the packet capture in pcap format
B. It uses EXEC-level commands to start and stop the capture
C. The Cisco IOS output is displayed in a human-readable format
D. It has the ability to preserve Ethernet encapsulation information when exported
E. It has the ability to capture packets in the Cisco Express Forwarding path
F. The capture can be performed only on physical interfaces and subinterfaces

Answer: A,B,E

Question: 12

Which operational metric to measure the health of the incident management process is critical?

A. A number of successful changes
B. Number of incidents per severity level
C. Mean time to restore service
D. Mean time to resolve incidents

Answer: A

Question: 13

Which are the two characteristics of 4G/L TE networks? (Choose two)

A. eNodeB uplinks to the packet core use the lub interface
B. 4G/LTE networks use centralized MTSO-based handoff between cell towers
C. The E-UTRAN model forms the basis of 4G/L TE RAN technologies
D. eNodeBs in the cell towers requires less buit-in intelligence
E. RNCs in 4G/LTE networks have built-in MPLS support
F. Using the X2 interface, eNodeBs have direct communication between each other

Answer: D, F

Question: 14

What type of IPv6 address is the address FF05::2:260:8F908?

A. Multicast temporary site local
B. Multicast permanent node link local
C. Multicast permanent site local
D. Multicast permanent link local

Answer: C


Download Cisco 400-201 CCIE Service Provider Exam PDF

Wednesday, 31 May 2017

Cisco 400-201 Exam Question Answers

Question: 7

How many bits are expressed by";:" in the address 2D01:DB::C:B7BA:130B?

A. 16 bits
B. 32 bits
C. 40 bits
D. 44 bits
E. 48 bits
F. 56 bits
G. 64 bits

Answer: E

Question: 8

A Service Provider is designing control policies at the customer edge of the network, in order to prevent usage that exceeds the contracted terms. A new client that is contracted for only 2 Gbps is connecting to the Service Provider edge with a 10 Gbps interface. Which two QoS strategies meet the design goal? (Choose two.)

A. On the service Provider edge, enable traffic shaping on the customer port.
B. On the customer edge device, enable traffic shaping on the interface that is connected to the Service Provider.
C. On the customer edge device, enable policing on the interface that is connected to the Service Provider.
D. On the service Provider edge, enable policing on the customer port.
E. On the service Provider edge, enable WRED on the customer port.
F. On the customer edge, enable WRED on the interface that is connected to the Service Provider.

Answer: B,D

Question: 9

An engineer is connecting a new 10-Gbps Ethernet link. Which type of transceiver must the engineer purchase that is the current industry standard?

A. GBIC
B. XFP
C. X2
D. SFP

Answer: A

Question: 10

The product team at an ISP that offers VoIP services wants to add two-way video conferencing to their product offering. Which three QoS methods can be applied for real-time traffic on WAN links with speeds that are slower than 768 Kbps? (Choose three.)

A. Apply MLP link fragmentation and interleaving to the interface.
B. Apply LLQ with both voice traffic and video traffic in the same priority queue.
C. Apply CBWFQ with VoIP traffic in its own class, which is marked with a PHB value of EF.
D. Apply CBWFQ with video traffic in its own class, which is marked with a PHB value of AF41.
E. Apply voice-adaptive fragmentation to ensure that large video packets are fragmented and interleaved.
F. Apply LLQ with video traffic that is dedicated in the priority queue.

Answer: A,C,D


CCIE SP Cisco 400-201 Exam Real Questions and Dumps

 

https://dumps4free.com/200-310-exam-questions-pdf-vce.html

Tuesday, 2 May 2017

Cisco 400-201 Practice Test

Question: 2

Which is one difference between H-VPLS and VPLS?

A. VPLS is a point-to-point Layer-2 services and H-VPLS is a multipoint Layer-2 services.
B. H-VPLS reduces signaling overhead and packet replication requirementsfor the provider edge.
C. VPLS improve scalability concerns identified on H-VPLS implementation.
D. H-VPLS connects using also other Layer-2 encapsulation such as PPP and VPLS connects using Ethernet encapsulation only

Answer: B

Question: 3

A service provider is managing a CE router that is used to segment multiple customers into dedicated
VRFs. OSPF is used as the F protocol. The managed CE does not have the customers' routes in its RIB. To
allow the CE to install these routes, which command i implemented?

A. local-rib-criteria
B. no prefix-suppression
C. capability vrf-lite
D. domain-id <value>

Answer: C

CISCO 400-201 Exam Sample Questions Practice Exam


Question: 4

Network Operations team has configured the routers with the logging buffered warnings command. Which three severity levels appear in the router syslog? (Choose three.)

A. errors
B. notifications
C. informational
D. alerts
E. debugging
F. emergencies

Answer: A,D,F

Question: 5

What is NETCONF?

A. It is a standard for installing, manipulating and deleting configuration of network devices.
B. it is a Cisco proprietary solution to help remove the time, cost and manual steps involved in network
element configuration.
C. It is data modeling language, to help remove the time, cost and manual steps involved in network element
configuration.
D. It is a new recommendation which writes device specific CLI scripts while keeping flexibility in a vendor
dependence environment.

Answer: A

Question: 6

An IS-IS enabled router with multiple IS-IS neighbors is required to have BFD sessions with all neighbors. Which BFD mode should you use when you want to save the overhead of  periodic protocol control packets?

A. echo
B. asynchronous
C. demand
D. active

Answer: C

Cisco 400-201 CCNP Data Center Test Questions PDF

 

http://dumps4free.com/400-201-exam-questions-pdf-vce.html

Friday, 7 April 2017

Cisco 400-201 Exam Question Answers

Question: 1

Select two valid administratively scoped multicast addresses in networks running Interior Gateway protocols like EIGRP and OSPF (Choose two).

A. 239.255.255.255
B. 224.0.0.10
C. 239.0.0.1
D. 224.0.0.5

Answer: A,C

Tuesday, 14 February 2017

Cisco 350-029 Has Been Retired by Cisco


Cisco Certification CCIE exam 350-029 (CCIE SP Written Exam) has been retired by Cisco and replace with new Cisco exam 400-201 (CCIE Service Provider Written Exam Version 4.0).

Thursday, 26 January 2017

350-029 Sample Question

Question: 21

How do routers in an IS-IS Level-1 domain exit to reach other Level-1 domains? (Choose two.)

A. Level-1 routers use default routes announced by Level-2 routers in Level-1 domain
B. Level-1 routers use default routes installed based on ATT bit (Attach Bit) in announcements from Level-1-2 router
C. Level-1 routers use specific routes, for other Level-1 domain, announced by Level-1-2 router by route leaking feature of Cisco IOS
D. Level-1 routers use specific routes, for other Level-1 domain, announced by Level-2 router by route-leaking feature of Cisco IOS

Answer: B,C

Wednesday, 4 January 2017

350-029 Sample Question

Question: 20

In optical channel transport unit overhead (OTU OH), what are general communication channels 1 and 2 (GCC1/GCC2) used for?

A. for trail trace identification
B. as the backward defect indicator
C. to transmit information between OTU termination points
D. to extend command and management functions over several frames
E. General communication channels 1 and 2 (GCC1/GCC2) do not belong to OTU OH.

Answer: E

Explanation:

OTU overhead: The OTU overhead consists of three bytes for section monitoring (SM), a two-byte general communications channel (GCC0), and two bytes reserved for future international standardization.